We independently research,review,test and recommend the best products.If you buy something through our links, we may earn a commission.

Dyson Vacuum Leaving Marks On Floor-[Explained]

There has been a significant contradiction about Dyson vacuum cleaners leaving marks on the floor. A lot of users have complained about this. You may have seen Dyson vacuums scratching different kinds of floors alike.

To prevent your Dyson vacuum leaving marks on floor, check to see if you’re vacuuming correctly using the proper head attachment. Set the machine to the correct power settings and use the right pushing & pulling methods. Finally, get your Dyson serviced if you have identified any mechanical issues.

Dyson is the prime choice for most household vacuum cleaners. Their excellent performance with great affordability does seem lucrative. The company has provided its consumers a superior service for a very long time. But all good things evidently come with a drawback. Unfortunately, that is also true for Dyson vacuum cleaners.

Why Do Dyson Vacuums Leave Marks On The Floor?

Multiple theories may describe why Dyson vacuum cleaners are scraping floors. Most of these are not well explained and considered hypotheses. 

One of the causes could be design flaws. Dyson might have failed to architect their vacuum cleaners to be able to swipe on every surface. Most users blamed the wheels. 

The roller brushes equipped with thick bristles can be a problem. These roller brushes often leave scratches on hardwood floors. The thick bristles are the culprit behind this.

Dyson’s motorhead is also considered to be at fault sometimes. Using the motorhead at high power settings might leave marks on the floor.

However, the manufacturers can not be held responsible for every case. Often, the user is the one responsible for obliterating their floors. There are many scenarios where the cleaning head scrubbed the hardwood floor and left nasty marks. Not using appropriate attachments for different kinds of the floor might be the reason behind this.

See Our Review Wet Dry Vacuum For Tile Floors

Cases Of Dyson Vacuum Leaving Marks On The Floor

Cases Of Dyson Vacuum Leaving Marks On The Floor

Dyson has multiple versions of its vacuum cleaners. The Dyson V6 supposedly leaves white marks on laminate floors. The two tiny rubber wheels under the brush are the reason behind this. These rubber wheels wear out and start leaving marks on laminate floors.

Another most common incident is the Dyson vacuum scratching the hardwood floor. There are quite a few explanations for this. As usual, the wheels are at fault. We have heard cases where the wheels scratch the hardwood floor with a curve when the canister turns.

Dyson vacuum cleaners can stain hardwood floors if the proper attachment is used. Most of the time, scratching issues can be solved by just changing the cleaner head.

Read More:-Where are Dyson Vacuums Made? Brand Histrory

How To Solve The Issue Of Dyson Vacuum Leaving Marks On The Floor

Before finding the solution to the problem, you must consider some questions and try to find the answers. Let’s dive deeper.

Is the floor being vacuumed properly?

Before blaming your Dyson for scratch marks, the foremost thing you should consider is whether your floor is being vacuumed properly or not. If dust is not wiped out properly and debris is still left on the floor, these can play a role in staining your floor. 

The vacuum cleaner could swipe dust or big chunks of debris into the floor, and your floor would be scrapped. To avoid this, properly clean your floor and leave no dust or particles behind.

Are you using the appropriate cleaner head for your Dyson?

Next comes the cleaner head of your vacuum. Cleaning heads are absolutely necessary to clean different kinds of surfaces. Dysons come with various cleaning heads, such as the soft roller brush, direct-drive head, high torque head, etc. 

You have to choose the right one for your floor. For hardwood floors, use fluffy head attachments. In most cases, using the proper attachment with your Dyson solves the problem. So if you are finding your floors being scratched after vacuuming, try changing your cleaning heads.

Is your Dyson set to the right power and settings?

Dyson vacuum cleaners are known for their extreme suction power. Dyson vacuums usually have two settings – Boost mode and Auto mode. The latest models like the V10 have an extra setting named Eco Mode. You can also set the suction power manually,

Using boost mode or high power settings can sometimes leave a mark on the floor. It is not unusual for vacuum cleaners to scrape floors if they are running on maximum power. 

Lower your power setting if you are experiencing floor stains. Different surfaces have different levels of tolerance against suction power, after all.

Is your pushing and pulling method accurate?

Some users may not understand this, but their method of pulling or pushing the vacuum is sometimes the reason behind floor marks. You have to push the vacuum cleaner gently. Using the Dyson roughly and carelessly may scratch the floor. 

If you apply too much force on the vacuum cleaner, the motorhead or Dyson balls will be pushed against the floor and leave scratch marks. It is vital that you push the vacuum cleaner in the right way.

Are you sure it’s the vacuum cleaner that is staining your floor?

It is not always the vacuum cleaner’s fault. There might be other reasons your floors are leaving a mark. Always check for every possibility. 

Maybe one of your furniture is scratching your floor while being dragged around. Or it could be your pet who is messing around on the floor. Nothing is certain. So, before focusing on the vacuum cleaner, look out for other reasons.

Have you checked your Dyson for possible faults?

Last but not least, you should always check your Dyson for possible faults. Like every machine, Dyson vacuum cleaners are not eternal and can become faulty. 

Any part of the machine can get damaged or wear out. Worn-out Dyson wheels left rubbery marks on the floors in many cases. That is why you have to check your Dyson from time to time and replace parts if needed.

How To Choose The Best Attachments

Picking the right attachments might be tricky for even experienced people. Fear not! We have accumulated all the necessary data, information, and tips regarding the extensions for your Dyson.

Different cleaning heads or attachments depend on the surface type. Floors can be made of various materials. Flooring can be made of hardwood, marbles, laminate, or tiles. You need different kinds of attachments for each type of flooring.

Here is what you should keep in mind while choosing attachments for your floor if you have a hardwood floor.

Keep Roller Brushes Away

Rolling brushes might be trendy among everyday folks. However, they are made for wiping dirt, dust particles, hair, or debris. This is not the case for hardwood floors. Most often, these brushes will bruise your hardwood floors.

So, try not to use the roller brush as much as possible.

Use Rubber Wheels And Padding

Use Rubber Wheels And Padding

External rubber padding and wheels can minimize the risk of scratching your floor. Remember always to check the wheel before you start vacuuming. 

Do not use a beater brush to vacuum other floors like marble or laminate floors. Use a soft cleaner head for gentle vacuuming. 

The cleaning head of Dyson must be agile and be able to pivot around swiftly. Dragging the vacuum cleaner around the floor only leads to scraping.

How Often Should You Vacuum Your Floor To Avoid Leaving Marks?

Frankly speaking, it depends on you entirely. Keeping the floor clean adds to your home’s aesthetic and prevents potential health hazards. 

Vacuuming frequently can be of benefit. Your floor will always remain tidy and dust-free. But a vacuuming session per day should be enough if your house is not prone to constant dust from the outside.

Pro Tips 

Here is a quick tip for better and safer vacuuming. Try to manually broom and sweep your floor a bit before vacuuming. Vacuum cleaners often drag large dust particles or debris on the floor and leave marks.

To avoid this, you can use a broomstick to sweep your floors beforehand and remove dirt from the floor. Nozzles should be used for vacuuming narrow parts and corners. Do not try to drag your Dyson in those tricky areas. 

Get a compact and light model of Dyson for easier vacuuming. Heavy vacuum cleaners put pressure on your back and are difficult to push and pull. They also tend to scratch the floor more. Compact, light models of Dyson do fine in this matter.

Bottom Line

Due to their extraordinary execution, Dyson has been a popular choice in general. It is undeniable that Dyson vacuum cleaners offer excellent service and are one of the best in the trade. But you need to look out for the drawbacks too.

Scratching the floor is a known issue for Dyson vacuum cleaners. But it is not something that can not be solved. By maintaining a few precautions, you can prevent your floor from scratches.

2 thoughts on “Dyson Vacuum Leaving Marks On Floor-[Explained]”

Leave a Comment